RA-BeastMode

Hello all. I have been searching the forums and other websites for most of the day trying to find out what the lengths are for the alternator and power steering belts respectively. I couldn't pinpoint a thread for FDs and the other websites left me with inconclusive answers. The lengths that I found for the FD were 41", 34.1", and 50 something inches. Can someone tell me which belt length is for which pulley or are both the belts the same lengths? This is for a stock, manual FD. It is also a JDM R1 but I don't know if that would make a difference since the engines are the same as the American FDs. Also, are the belts supposed to have 6 ribs or 5?

I looked up how to replace the belts on here and a few other places but found nothing specifically for the FD. Can anyone give me some pointers on stuff that needs to be removed in order to access the belts and things to watch out for? Thanks in advanced.

96fd3s

Hi there, stock belt sizes are as follows;

6PK1045 (so 6 ribs, 1045mm long)
5PK1355 (5 ribs, 1355mm long)



EDIT - 1045mm = 41.14 "
1355mm = 53.34"

RA-BeastMode

Thanks a lot, much appreciated.