3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

secondary turbo issues/blown

Thread Tools
 
Search this Thread
 
Old 11-04-10, 02:40 PM
  #1  
rotorizer

Thread Starter
 
88rxdriftr's Avatar
 
Join Date: May 2006
Location: sac/ bay area <vacaville>
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
CA secondary turbo issues/blown

so i finally go the secondary turbo going(vacuum hoses hooked up to wrong spots).and im out for a night time cruise to get food. i give her some gas and the secondary turbo kicks on. then woosh!. no boost just a whosshing and slight grinding noise. i limp her home and figure ill look in the morning. i take off some intake piping and there is a little oil and a good amount of metal shavings. i assume they are from the turbo... does it sound like its dead or where should i check... i looked at all the intake pipe couplers and they are all intact and secured tightly. ... is it new turbo time?
Old 11-04-10, 05:07 PM
  #2  
I

iTrader: (3)
 
Prôdigy2nd's Avatar
 
Join Date: Oct 2005
Location: Alberta, Canada
Posts: 993
Likes: 0
Received 1 Like on 1 Post
Only to confirm they are toast is to have a look at them... I would sugguest taking them out completely...


J.
Old 11-04-10, 05:43 PM
  #3  
rotorizer

Thread Starter
 
88rxdriftr's Avatar
 
Join Date: May 2006
Location: sac/ bay area <vacaville>
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
i was contemplating getting either the bnr stage 3 or going single anyways . i might as well start now. thanks
Old 11-05-10, 01:34 AM
  #4  
I

iTrader: (3)
 
Prôdigy2nd's Avatar
 
Join Date: Oct 2005
Location: Alberta, Canada
Posts: 993
Likes: 0
Received 1 Like on 1 Post
Personally I would go BNR's but I prefer the twins, and all their "lovable" issues...


J.
Old 11-05-10, 10:43 AM
  #5  
needs more track time

iTrader: (16)
 
gracer7-rx7's Avatar
 
Join Date: Mar 2006
Location: Bay Area CA
Posts: 9,194
Received 510 Likes on 351 Posts
any smoke?
Old 11-05-10, 01:04 PM
  #6  
rotorizer

Thread Starter
 
88rxdriftr's Avatar
 
Join Date: May 2006
Location: sac/ bay area <vacaville>
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
i didnt see any smoke but i wasnt looking . i dont want to drive it again because of all the metal shavings in the intake piping.
Old 11-11-10, 04:39 AM
  #7  
Full Member

 
Macen's Avatar
 
Join Date: Mar 2007
Location: Varberg, Sweden
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/turbo-shredded-lock-nut-928653/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
05-30-19 08:47 PM
Th0m4s
Build Threads
25
02-26-19 02:04 AM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
hotshot2014
New Member RX-7 Technical
8
07-18-17 02:30 PM



Quick Reply: secondary turbo issues/blown



All times are GMT -5. The time now is 06:40 AM.