Rx7store v-mount intercooler with stock radiator?
I know the Rotary Extreme V-mount intercooler did fit with stock radiator but I only had to do that for a short time while I waited for a couple missing brackets and didnt do any boosting on it. You would never want to plan on running a setup like that on purpose.
Trending Topics
just FYI i had basically bad performance with this VMIC kit. the coolant temps were rock solid (with undertray removed) but the air temps were not good at all. at a hot track day (ambient temp ~90*F) the intake temps were getting up to almost 160*F on the track in 4th gear.
the inside of the core also did not have very dense "inter foilers" or whatever they're called (basically the cooling fins that are inline with the airflow inside the "tubes" of the IC). i was not impressed with the IC for track use.
i switched to an ebay CXracing smaller intercooler and made a fresh air intake and the temps dropped substantially and were great.
the inside of the core also did not have very dense "inter foilers" or whatever they're called (basically the cooling fins that are inline with the airflow inside the "tubes" of the IC). i was not impressed with the IC for track use.
i switched to an ebay CXracing smaller intercooler and made a fresh air intake and the temps dropped substantially and were great.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM






