rx-8 rotor!
04-21-02, 11:55 AM
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,826
Received 2,594 Likes
on
1,842 Posts
the picture you see with all of the fins in the rotor, is a cutaway of the rotor. every rotor mazda has ever made looks like that if you cut it open. http://www.mazdatrix.com/faq/cutaways.htm
however since the renisis rotor is lighter they probably made the casting thinner (this is what they have done in the past for 86 and again for 89)
the question you want to ask is:
if the rotor is thinner will it stand up to the higher combustion pressure in a turbos charged application??http://www.mazdatrix.com/faq/boost.htm
mike
however since the renisis rotor is lighter they probably made the casting thinner (this is what they have done in the past for 86 and again for 89)
the question you want to ask is:
if the rotor is thinner will it stand up to the higher combustion pressure in a turbos charged application??http://www.mazdatrix.com/faq/boost.htm
mike
Thread
Thread Starter
Forum
Replies
Last Post