Rubber Fuel Lines with AN Fittings?
#1
For the win...
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: St. Paul, Minnesota
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Rubber Fuel Lines with AN Fittings?
I would like to use some 5/16th high pressure fuel line (non SS braided) to connect up with the AN fittings for my fuel kit. Will the rubber hose thread/seal into the AN fittings, or should I stick to the braided hose? I tested it briefly and it seemed like it would be ok.
Thank you in advance,
-Rotary4tw
Thank you in advance,
-Rotary4tw
#5
For the win...
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: St. Paul, Minnesota
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
okay
Other materials = used with AN fittings
High pressure hose = other materials...
Therefore:
High pressure hose 4tw...
Pictures will be provided later tonight with the success or failure of the setup!!!
-Rotary4tw
High pressure hose = other materials...
Therefore:
High pressure hose 4tw...
Pictures will be provided later tonight with the success or failure of the setup!!!
-Rotary4tw