Hi all,
I have a 2nd gen Miata with a rspeed plug & play hub adapter that disables the air bag warning light, has wiring for horn & fitment is perfect. I'm selling my Miata & want to install this Momo wheel along with this hub adapter on my FD. Question is, will it fit? Has anyone installed one of these on their FD or do you know if the steering column shaft & splines are the same as the Miata's? Any info would be helpful & perhaps it'll save me the trouble of removing the FD wheel just to find out that it doesn't fit. The good guys at rspeed doesn't know either. You can check out the hub at www.rspeed.net under the interior section. Thanks in advance.

Kyle

 

i think i have a similar one. except it was branded as a finishline hub when i got it. mine was for a 1st gen Miata iirc. take it with you and if it doesn't work on the FD just resell it on miata.net.

 

im almost positive the miata steering shaft is the same as the FD

 

I know that 1st gen miata hubs fit on the FD, but I'm not sure about 2nd gen's. There must be some difference since they sell two different hubs for miatas.