is it supposed to leak out gas out the lines if they are reveresed?????

 

leak from where??? i dont know i have never done it but i would think that leaking is another prob.

 

Why don't you just reference your shop manual and be sure you have them routed correctly. You should be able to see them well enough behind the UIM.

 

i just tried to crank on it like 5 times.. ran for like 10 sec den died... there was a puddle of gas on the floor... i really havent had time to really look at it.... but after the rebilds lots of peoplr hookem up wrong... so i was just wondering....

 

Where is the gas coming from? If you run a fuel line to the charcoal canister line then that could be bad

Just make sure they are right....you ALWAYS want to double check and do it right the first time unless you want to be repairing things that get screwed up from doing it wrong

STEPHEN

 

I got mine crossed when doing a turbo swap... opps
Had a puddle 15' by 10' on the ground... check the manual... one of the sponsors of this site has it on their website.