removing throttle body coolant lines
#3
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
You remove 3 rubber hoses and 6 clamps .All good places to leak . I put pipe plugs where the nipples were or if the water pump houseing is off ,that hole is welded closed and smoothed out .I also make a plate to cover the holes where the hot wax rod was .I cut off the shaft for the cam and remove all that junk .Clean clean Plus you no longer have to adjust it . Cold start is no problem with the Power FC .
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM