Removing stock BOV's
09-17-02, 02:00 PM
#1
Glug Glug Glug Burp
Thread Starter
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Removing stock BOV's
I want to use the Greddy elbow, and a single blowoff...
How do I remove and cap the stockers?
Anyone have some pics?
Thanks!
How do I remove and cap the stockers?
Anyone have some pics?
Thanks!
09-17-02, 08:04 PM
#3
cap off your BOV, NOT your CRV!!
i haven't done it myself but at your local auto parts place, look for the HELP! section. They make rubber caps that should fit. put it on the large nipple on the y-pipe. be sure to clamp it on there somehow
install the new BOV where you want it.
then you should just need to run a vacuum line to your new BOV and you are set.
i haven't done it myself but at your local auto parts place, look for the HELP! section. They make rubber caps that should fit. put it on the large nipple on the y-pipe. be sure to clamp it on there somehow
install the new BOV where you want it.
then you should just need to run a vacuum line to your new BOV and you are set.