Removing Lower Control Arms. Need some help.
#1
Turbo Lover
Thread Starter
iTrader: (6)
Join Date: Feb 2003
Location: Cleveland
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Removing Lower Control Arms. Need some help.
So I'm in the process of changing out my pillowball bushings and I'm trying to remove my control arms so I can use a press. Problem I'm having is that I can't seem to be able to remove the rear bolt on the rear lower control arms. It is also the bolt that allows you to adjust the camber.
Is there a trick or method to removing this bolt/nut? Do you need air tools to do it?
Is there a trick or method to removing this bolt/nut? Do you need air tools to do it?
#2
Sponsor
iTrader: (41)
You have to hold the head of the bolt stationary and turn the nut. Although that bolt can be tight, I have never had much problems with it. Spray it up with some pb blaster and let it soak. Use a breaker bar if you have to. I don't really like to use air tools on those but you can if you must.
Thread
Thread Starter
Forum
Replies
Last Post