RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Removed the R1 wing and I think I like it (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/removed-r1-wing-i-think-i-like-636062/)

c00lduke 03-25-07 12:00 PM

Removed the R1 wing and I think I like it
 
I had been thinking about taking off the R1 wing to see how it would look and I think I might keep it off. I found these little rubber plugs for the holes for now just incase I decide to put it back on. There are a few trouble spots in the paint from where the wing came in contact with the hatch. Excuse the broken driver side tail light, had a bit of trouble the other day. (Let me know if you have an extra you'd like to get rid of) Also sorry about the photo quality of the new photos. I used my cell phone.

Before
http://i14.photobucket.com/albums/a3.../IMG_34721.jpg
http://i14.photobucket.com/albums/a3...e/rearshot.jpg

After
http://i14.photobucket.com/albums/a3...7/SSPX0041.jpg
http://i14.photobucket.com/albums/a3...7/SSPX0049.jpg
http://i14.photobucket.com/albums/a3...7/SSPX0039.jpg
http://i14.photobucket.com/albums/a3...7/SSPX0038.jpg

rx7what 03-25-07 12:04 PM

Looks nice. I never was a fan of the R1 wing.

What size and offset wheels did you fit under the pettit flare's? 18x13?

prescription 7 03-25-07 12:37 PM

Wow super clean! Those are some fat ass rims too, like 12" wide?

c00lduke 03-25-07 12:44 PM


Originally Posted by rx7what
Looks nice. I never was a fan of the R1 wing.

What size and offset wheels did you fit under the pettit flare's? 18x13?

They are 18x12 with a +18 offset.

str8ryd 03-25-07 12:46 PM

+2, Details on the rims please. They look HUGE! Also, could you post more pics of your engine bay. I really like the color scheme. Very unique and different. Props to you!

HKNY 03-25-07 03:04 PM

looks pretty bad ass

felix_is_alive 03-25-07 03:10 PM

isn`t that the stock 3rd gen wing?......nice rims

dontlift 03-25-07 03:26 PM


isn`t that the stock 3rd gen wing?
It was stock on the R1/R2 models only. The base/touring/PEP models didn't have a wing at all (except as a dealer-installed accessory).

The car does look nice. I think now it looks even wider...

BoostedTimmy 03-25-07 04:12 PM

It looks better without!

Your RB duals are just hanging there?

nfmsuprar1 03-25-07 04:23 PM

looks better wingless!

R_PROWESS 03-25-07 05:11 PM

i agree keep it off

c00lduke 03-25-07 05:28 PM


Originally Posted by str8ryd
+2, Details on the rims please. They look HUGE! Also, could you post more pics of your engine bay. I really like the color scheme. Very unique and different. Props to you!

Heres another image I have laying around. The only thing that has changed in the location of the AST.

http://i14.photobucket.com/albums/a3.../IMG_34661.jpg


Originally Posted by BoostedTimmy
It looks better without!

Your RB duals are just hanging there?

Thanks for your comments guys. I hadn't saved the hanger from the stock one so I had to order a new one. The dealership I went through isn't my normal one and they've been jerking my around. I just put it on last weekend and was hoping to have it all together by now but the left hanger to taking the load for the time being.

charliegt 03-25-07 05:44 PM

Great looking car! I'm a fan of the wingless look (I have a touring model without the wing). The rear wheel flares look great, the whole car looks very clean. I also like the engine detail, matching it to the wheels looks great.

charlie

spandy 03-25-07 05:49 PM

I don't care for any wings/spoilers on the FD. Much cleaner looking imo without anything back there.

GregFD3S 03-25-07 06:07 PM

I think it looks good either way. just out of curiousity, how much HP are you putting down to the wheels?

KX500FD1 03-25-07 06:09 PM

nice

7_rocket 03-25-07 07:10 PM

please put a r1 lip on the front bumper

c00lduke 03-25-07 08:59 PM


Originally Posted by 1.3 liter V8 eater
I think it looks good either way. just out of curiousity, how much HP are you putting down to the wheels?

When I had it tunned the motor was pretty new so I left it on the low boost setting. Hoping to get it retuned soon at a higher boost but either way the HP level will probably be left up to guessing. I don't get traction in 1st or 2nd. While the could be a number of different variables I still feel its quick.


Originally Posted by 7_rocket
please put a r1 lip on the front bumper

I know it makes a huge difference but I've always been on the edge about buying an after market front bumper instead. I feel that will be happening within the next couple weeks.

arghx 03-25-07 10:31 PM

I'm sorry dude, but FD's look totally plain without a wing. It's almost as bad as a second gen without a wing...

KX500FD1 03-25-07 10:55 PM

you're nuts

the shape of an FD is the definition of sexy in the automotive world....it needs nothing....the wing and lip are just ricer cheese

Smitter 03-26-07 03:16 AM

i vote for the rear wing

vellj001 03-26-07 03:45 AM

Personally I do not like wingless FD at all.

Tanjo 03-26-07 08:36 AM

The only wing that I like is the 96 spec dolphin tail. Everything else just looks like crap. What bumper are you leaning towards? MS GTC or Origin, those are my votes.

ArmitageGVR4 03-26-07 09:00 AM

I think I'm starting to agree with you. My BB use to have no wing http://armitage.crinkle.net/gallery/...1199.thumb.jpg but I put one on and now I'm starting to wish I hadn't cut all those holes in the deck. Really nice car you've got there!

dubulup 03-26-07 09:11 AM

I removed my wing for paint...and kind of like it (at certain angles)
http://i7.photobucket.com/albums/y28...p/DSC06743.jpg
http://i7.photobucket.com/albums/y28...p/DSC06745.jpg

I might remove the wing for good??
http://i7.photobucket.com/albums/y284/dubulup/car.jpg
^but this is hot!

not so sure??
http://i7.photobucket.com/albums/y28...p/DSC06744.jpg


All times are GMT -5. The time now is 08:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands