Rear End Plate - plug question
01-06-06, 03:28 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: New Zealand
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Rear End Plate - plug question
hi everyone, on the rear end plate there are two connectors (i'm referring to water temp sensor plug and the oil pressure sender plug below it)... my question is... where in the harness do these attach to? i THINK that the water temp sensor would go from the main engine harness behind the engine and that the oil pressure sender would plug into the battery side harness (that runs along beside the gearbox) but does anyone know any different?
01-06-06, 06:32 PM
#2
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
The water sensor to the gage wire is in the main harness and the wire color is yellow with a white stripe . The oil pressure wire IS in the battery side harness and the color is gray with a red stripe .
Thread
Thread Starter
Forum
Replies
Last Post