GMO-RX7

iTrader: (21)

What is the difference between the 13b RE twin turbos and the 13b REW twin turbos? My twins on the fd are junk (of course) and I am wondering if a set of twins from an RE engine could be used? Any info appreciated thanks

rdahm

iTrader: (6)

i bought a pair of JDM RE twins and they only work with the JDM manifold. but i think the combo works together.

turboIIrotary

iTrader: (9)

they don't fit

stalkn_etsv8s

RE as in JC Cosmo turbos are smaller than FD turbos this was part of the reason JC Cosmos made less power even though they have larger ports. I cant quite remember if they will bolt up but regardless it will be a down grade

(i should point out i deal only with JDM cars so unless US spec turbos are different?)

GMO-RX7

iTrader: (21)

I figured. Thanks guys. I wont bother with it. Well there is a set of twins f/s for an RE engine with no cracking or damage for $100 that I found if anybody needs them let me know I will give you the link. I am swaping a single turbo ported motor into my fd and I am going to take on swaping my fd's REW into a FC. (Im aware of the complications) I am looking for a good set of twins for the swap because I have two sets and they both have cracking. So, if anybody has a good set for cheap please let me know. Thanks

arghx

iTrader: (3)

13B-RE has two HT10's
13B-REW has two HT-12's
20B has one HT15 and one HT10
FC has HT18S-2S (twin scroll, a little different between series 4 and 5)
FB 12A turbo has plain old HT18, single scroll

7passu

iTrader: (10)

Alot if the times, the cracks don't hurt anything....if they don't smoke/leak oil then I would use them

j9fd3s

iTrader: (3)

exactly!