RE Sleek Light Covers
#26
Rotary Freak
iTrader: (22)
I just double checked my kit to ensure that I have the genuine RE covers - I bought the car used and the previous owner was sketchy at best so I'm trying to verify everything rather than taking his word for it. I have IPF/PIAA lights (which I'm swapping out for HIDs from the retrofit source) and the same bracketry as shown here. RE-Amemiya Sleek Light Kit H11 Type FD3S 13B
So I'm confident that the covers that are being used as our models are the REs (they are 1/8" thick thermoformed acrylic according to the plastics manufacturer...) I PMd a moderator re: the proper protocol for a group buy but haven't heard back. Can any of you shed light on this?
Thanks,
Aaron
So I'm confident that the covers that are being used as our models are the REs (they are 1/8" thick thermoformed acrylic according to the plastics manufacturer...) I PMd a moderator re: the proper protocol for a group buy but haven't heard back. Can any of you shed light on this?
Thanks,
Aaron
#29
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Sleek Light Photos
Hi Gents,
Here are some photos of my lenses and buckets - let me know yes/no if these look like authentic RE pieces. I definitely don't want to step in it by replicating lenses that no one wants. My IPF lights are in very poor condition (rusted etc) so you wouldn't want them :-)
Rx7 Sleek Lights - a set on Flickr
Thanks,
Aaron
Here are some photos of my lenses and buckets - let me know yes/no if these look like authentic RE pieces. I definitely don't want to step in it by replicating lenses that no one wants. My IPF lights are in very poor condition (rusted etc) so you wouldn't want them :-)
Rx7 Sleek Lights - a set on Flickr
Thanks,
Aaron
#33
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Great - give me a quick primer on how to do an official group buy thread. I'm not trying to do anything covert, I just don't have time to parse through all of the rules/regs of the forum...
#34
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Hi Gang,
Please don't send any funds yet as I need a few tips on setting this up as an official GB - from what I've gathered I may need to raise the price a little to cover this "cost".
Thanks,
Aaron
Please don't send any funds yet as I need a few tips on setting this up as an official GB - from what I've gathered I may need to raise the price a little to cover this "cost".
Thanks,
Aaron
#35
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Ok - I PMd a moderator and haven't heard back. I perused the group buy section of the forum, and there is a $75 charge for "vendors". Am I considered a vendor now that I'm attempting to facilitate this group buy? If so, I"m going to register and then re-price the covers to meet that cost. I'll then start accepting paypal deposits. Someone chime in here and point me in the right direction
Thanks,
Aaron
Thanks,
Aaron
#36
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Hello Everyone,
I'm going to register as a 'vendor' for 1 month ($75 charge) so this group buy is legit on the forum. I'm going to pass this cost along making the final prices (including shipping in cont US) to be $157.50 per pair of covers and $167.50 for a pair with adhesive vinyl templates for painting. Paypal me at Dabossajk@gmail.com. As soon as I have 8 payers, I'll place the order with Ridout. I spoke to the production manager yesterday, and he assured me of their quality and ability to duplicate the shape and contour of my original RE covers.
Thanks,
Aaron
I'm going to register as a 'vendor' for 1 month ($75 charge) so this group buy is legit on the forum. I'm going to pass this cost along making the final prices (including shipping in cont US) to be $157.50 per pair of covers and $167.50 for a pair with adhesive vinyl templates for painting. Paypal me at Dabossajk@gmail.com. As soon as I have 8 payers, I'll place the order with Ridout. I spoke to the production manager yesterday, and he assured me of their quality and ability to duplicate the shape and contour of my original RE covers.
Thanks,
Aaron
#40
Senior Member
iTrader: (6)
Join Date: Jun 2007
Location: Tampa, Florida
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Hello Everyone,
I'm going to register as a 'vendor' for 1 month ($75 charge) so this group buy is legit on the forum. I'm going to pass this cost along making the final prices (including shipping in cont US) to be $157.50 per pair of covers and $167.50 for a pair with adhesive vinyl templates for painting. Paypal me at Dabossajk@gmail.com. As soon as I have 8 payers, I'll place the order with Ridout. I spoke to the production manager yesterday, and he assured me of their quality and ability to duplicate the shape and contour of my original RE covers.
Thanks,
Aaron
I'm going to register as a 'vendor' for 1 month ($75 charge) so this group buy is legit on the forum. I'm going to pass this cost along making the final prices (including shipping in cont US) to be $157.50 per pair of covers and $167.50 for a pair with adhesive vinyl templates for painting. Paypal me at Dabossajk@gmail.com. As soon as I have 8 payers, I'll place the order with Ridout. I spoke to the production manager yesterday, and he assured me of their quality and ability to duplicate the shape and contour of my original RE covers.
Thanks,
Aaron
https://www.rx7club.com/group-buy-pr...dgen-rx-7-269/
#41
Full Member
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the heads up - here's the new thread in the GB area.
https://www.rx7club.com/group-buy-pr.../#post11444517
https://www.rx7club.com/group-buy-pr.../#post11444517
You'll want to start a thread here:
https://www.rx7club.com/group-buy-pr...dgen-rx-7-269/
https://www.rx7club.com/group-buy-pr...dgen-rx-7-269/