RC Engineering
#3
Full Member
Join Date: Feb 2001
Location: woodstock,Ga
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I had them unstick one of my injectors. They also checked and flow matched mine again.
If you use them or anyone else, have them overnight the injectors back to you so you can put them in right away.
I had Marren Motor Sports clean and flow match mine and they sent them to me ground. I also had to wait a week after that to put them in and get my engine together and drop it in. When I tried to crank my car it wouldn't start...I had spark and fuel pressure. After talking with Dave @KD we narrowed it down to the injectors. Dave said the cleaning solution used for them if left to sit on them will harden and not even gas can dissolve it, thus, causes them to stick. I sent them to RC and when I got them back Voila it started.
Later..Scott
If you use them or anyone else, have them overnight the injectors back to you so you can put them in right away.
I had Marren Motor Sports clean and flow match mine and they sent them to me ground. I also had to wait a week after that to put them in and get my engine together and drop it in. When I tried to crank my car it wouldn't start...I had spark and fuel pressure. After talking with Dave @KD we narrowed it down to the injectors. Dave said the cleaning solution used for them if left to sit on them will harden and not even gas can dissolve it, thus, causes them to stick. I sent them to RC and when I got them back Voila it started.
Later..Scott
#7
Senior Member
iTrader: (4)
Join Date: Jul 2001
Location: long beach, ca
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
sorry i forgot. here the web site: www.r.ceng.com or email: RCFuel@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM