Radio Headunit Switch -- No Sound?
#1
93 Touring
Thread Starter
Radio Headunit Switch -- No Sound?
Just hooked up a headunit from an 02 626 (Bose) and all the switches etc work. Antenna goes up and down, illumination works -- but No Sound. The amps are not being turned on. Anyone know which wires need to go where to make the amps turn on (Bose).
93 Touring
Thanks for any help
93 Touring
Thanks for any help
#2
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
#5
93 Touring
Thread Starter
How to Move Pins in the Radio Harness?
OK, I've redone the wiring according to the link above and sure enough, I'm missing the pin that turns on the Bose amps. I have plenty of unused pins, so I'm thinking I could move an unused one to the empty slot. Trouble is, I can't figure out how to remove the pin.
I've opened the harness cover and it shows the wire right there, but I don't want to break the pin or the wire by forcing it out.
Can't find anything on the web about moving pins around.
Anyone know how to remove the pin/wire and reinstall it?
Thanks for any help
I've opened the harness cover and it shows the wire right there, but I don't want to break the pin or the wire by forcing it out.
Can't find anything on the web about moving pins around.
Anyone know how to remove the pin/wire and reinstall it?
Thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM