purerx7

iTrader: (61)

Okay, I am finished writing and taking pictures on how to install a Nardi steering wheel. I have one last, quick question regarding the wiring. In the picture below I need to know a couple things.

1. There are 3 wires in the main sleeve that goes to the actual airbag. I know the two wires that are wrapped I believe they are red and grey going to the two red wires in the nardi wheel, and it does not matter which wire goes to which. What is the green wire for?
2. What is the purpose of the orange clip? Is this a ground? What do I do with this?
3. The second pictures is the wiring from a stock nardi wheel, I know where the two red wires go, but what do I do with the white clip? The white and orange clip are not compatible, fyi.



Also, the spirit-r steering wheel is currently for sale.

purerx7

iTrader: (61)

someone has to know this?

runyun

iTrader: (23)

I did mine so quick (like 20mins start to finish) I couldn't tell you
You did see this thread right? Thats what I used to install https://www.rx7club.com/showthread.p...ighlight=nardi

My horn is functional.. no airbag light

Sled Driver

iTrader: (9)

The orange connector is for the horn. Goes to the single wire white connector in the picture.

I didn't have the extra (green) wire. Can't help you there.

You are correct that the airbag wire polarity doesn't matter. I have converted two wheels now.

I spliced the connectors off a blown bag & used wheel (horn connector). That way I can swap back to the stock 93-95 wheel when I sell my car. Sell my spirit R wheel seperatly.