A question for all you "experts"
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: Las Cruces NM
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
A question for all you "experts"
The situation:
One of my turbo blades was damaged causing the bushings to wear out causing a lot of smoke. There was enought oil to cause an oil streak to form at a minor air leak by the IC. I'm currently replacing everything but I noticed when I pulled off the injector assembly the front injector was clean but the rear injector was coating with a black carbon deposit. So is this coating from the oil or is it caused by something else?
So put on your thinking caps and let me know if I need to check something while I'm re-assembling everthing.
Thanks.
One of my turbo blades was damaged causing the bushings to wear out causing a lot of smoke. There was enought oil to cause an oil streak to form at a minor air leak by the IC. I'm currently replacing everything but I noticed when I pulled off the injector assembly the front injector was clean but the rear injector was coating with a black carbon deposit. So is this coating from the oil or is it caused by something else?
So put on your thinking caps and let me know if I need to check something while I'm re-assembling everthing.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM