OKay i just decied to test some codes, my car is throwing a Code 34 which is solenoid Valve(Idle speed control)
Does anyone know hwo to fix it by anychance, and also will this cause no spark? im diagnoisting a no spark problem ive been having for 2weeks, car does not run because of it. The front leading sparkplug is not sparking, but the rear is.

Ive tested and replaced all 3 coils, all wires and sparkplugs, and also replaced the ignitor, ive been searching and nothing so far on just 1 leading going out.

Any help apprciated.

Jackie

PS: car idles if i give her gas, but very ruff, once i get off of the gas it dies.

 

Another question, How come my timing is WAY off, i checked it with a timing light and my timing on my leading1 is way off....like about 1inch down the left side of the pulley compared to with the line.
May i have some assistance.

 

Your idle speed control solenoid wouldnt affect your spark/ignition,,,,, the only thing you havent listed is an ECU,,,, try borrow a friends and swap it in,,, see if it cures your problem

 

okay thankx, ill try and find one asap...ill update after i try it.

TTT for timing and how much will CAS affect my timing if it goes out?

 

OKay, i have no codes now, and cleared the ECU, sitll having a BAD timing problem...not sure what to do...any help plz or a helpful sight, ive been to rabunitte or w/e....but still nothing on how to fix timing

 

Timing is basically ECU controlled. Have you tested both CAS sensors per the FSM?

 

no, i have no idea what that means, but i have ofund out what is problem, i have like no compression in my rear rotor but my engine still works for some reason, kinda weird...but thx for evryones help, but expcially BEN!