3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Q on third>>>>

Thread Tools
 
Search this Thread
 
Old Jun 19, 2002 | 08:32 AM
  #1  
NO VENOM's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 75
Likes: 0
From: Carson City,NV
Q on third>>>>

Driving normal I can shift to any gear fairly easy but when I drop from gear to gear third gear seems to hang or grind on hard driving,any ideas??


Gil
Reply
Old Jun 19, 2002 | 08:46 AM
  #2  
Bill B's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: May 2002
Posts: 388
Likes: 3
From: Plantation, Florida
Sounds like a syncro
Reply
Old Jun 19, 2002 | 08:49 AM
  #3  
Johnny's Avatar
OG
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
I'd second that theory...

change the oil in the tranny to Neo or redline.. might help a little bit...atleast give you time
Reply
Old Jun 19, 2002 | 11:48 AM
  #4  
Street King's Avatar
*** Bless Texas!
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 775
Likes: 0
From: TX
Yeah I would say a synchro. Just take it easy on the shift. Dont SUPER SHIFT and it will fall in place with gentle pressure. My 5th gear syncro is bad but I could care less when would I need to power shift in 5th? I just apply gentle pressure until it goes in. Also what weird is you have to push it a certian way. I dont grab the top, I lay my handon the side of the shifter when I go into 5th. Yes synthetic will help a lot but its not a cure all. Ohh yeah if you ever needed to power shift into 5th you wont even hear it grind because the noise you are making at 130+mph will over ride it. I wouldnt worry about it until a few gears grind no matter how slow you put it into gear.
Reply




All times are GMT -5. The time now is 05:41 AM.