Purge control on single turbo ( + extra fuel rail ) setup
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2004
Location: New Zealand
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
Purge control on single turbo ( + extra fuel rail ) setup
Just putting the UIM back onto the FD, I took photos before it came off as a reference to all the hoses I pulled off and they're relocation. I've put it all back together but I notice that the black vacume hose that goes from the purge control solenoid to the UIM is not attatched and there is nowhere under the UIM to put it ( all holes taken up with whats in the photos ) . So I 'm thinking it was never plugged in to begin with, The car is a single Turbo setup, extra fuel rail , greddy FPR , bigger fuel pump, surge tank...
will having this unplugged cause any problems?
will having this unplugged cause any problems?
#2
RX-7 Bad Ass
iTrader: (55)
Nope - the purge control is just for emissions. Really, you can just open air vent the system, preferably with a filter.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM