pulsing idle
#1
Junior Member
Thread Starter
Join Date: Sep 2001
Location: Madison, WI
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
pulsing idle
First off I'd like to say thanks to everyone who helped me with my oil leak. I pulled the motor to fix it and stopped it, but now I've got the motor back in and my idle pulses between 1200 and 1400 rpm. I've checked every vacume line and kind find and no luck. I am out of ideas so if anyone has one please let me know. My the way the oil leak started again this morning so if anyone knows of a good shop in the Madison WI area or Chicago area please let me know.
Thank You,
Eli James
Thank You,
Eli James
#2
Vagina Junction
Join Date: Mar 2001
Location: Seattle, WA
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
I'll start by saying, there's no good shops. Then, ok, put the computer in diagnostic mode, and you can adjust the idle down. There's a screw hole in the bottom of the throttle body. If that don't help, man, start checking vacuum hoses again. also, check your TPS, might've got hurt in the process....long shot, but check it.
~Tom
~Tom
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM