Pulled the e-brake too hard and it snapped! :(
#1
Pulled the e-brake too hard and it snapped! :(
So..
As I pulled in my driveway tonight, I pulled up on the e-brake a little too quickly and I heard a snap. I put the e-brake lever back down, and there was no resistance when I pulled back it up.
The e-brake no longer engages the brakes and moves up freely without resistance.
Any ideas guys?
As I pulled in my driveway tonight, I pulled up on the e-brake a little too quickly and I heard a snap. I put the e-brake lever back down, and there was no resistance when I pulled back it up.
The e-brake no longer engages the brakes and moves up freely without resistance.
Any ideas guys?
Last edited by Wompa164; 05-18-06 at 12:22 AM.
#5
Rotary Enthusiast
iTrader: (5)
Join Date: Mar 2005
Location: Boxford, MA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Sometimes if you pull it too hard one of the barrels on the end of the cable will snap out of the fork on one of the rear brakes. I'd check that first before you look into the broken cable. This happened to me.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM