And I`ll take this first sorry for my shitty english...


I baught a japan imported 94mod FD, just tok out all interior..
Planing on building a Track car of it..

Here is what the car when I got it..

 

Sorry some bad pic, have to order new camera..


Here I have taken of the front end.











Here is just befor i beginning to take the motor out..




The radiator and the cooler is out..




Now the AC radiator is gone too..






Front of motor..




Then after some ******* around i got the motor out and the gearbox of.
I was suprised when I got the gearbox of, there was a HKS tripple or twin clutch on it..
Don`t remember if it was tripple or twin..






Here are pic of the clutch, looks like tripple..

 

Have a order for 2 PP housing from PDF on the forum..
And he has fixed SCR seal for me too, so I don`t have to order that later..

PP housing..










Have much more pic, just have to upload them..

 

I just baught these Border seats.. Just hope I can fit them in the car..

 

looking good. sould sound nuts too

 

Thanx..

Hope it sounds insaine...

I was thinking of ordering the 4in HKS racing exhaust..

 

looks nice as hell and are those housings ceramic coated? <-noob

 

whooo those seats may be an issue, but I wish you the best of luck!!!

 

Thanx..

I really don`t now if they are coated..

 

I just hope i can get them fitted if not I just sell them, and thanx..

 

Where did you buy the P-port housings? I may need a few.

 

I'll get them from PDF here on the forum, he livs in New Zealand..
I hope to have them here in 2-3 weeks...
Mayby he will build the inlet manifold too, then it will go 4-5 week befor i have them..

 

Whats wrong with ceramic coating your housings?

 

Congrats on the purchase, and good luck with the build!

 

Man, looks good but that exhaust port.....wow uh the top of the exhaust window is going to be a flow issue. Just my two cents. Let us know how things go.

 

+1 on letting us know how it goes. Looks good.

 

Dude, I have had many engines on the engine dyno....More exhuast than intake is better. Not to mention as little external back pressure as possible.

 

Is there a disadvantage to a PP?

 

The PP housing you see here is for an NA sett up..
He sendt me this just so I could see how they were made..
He is making them for a turbo sett up for me..

 

Wow, overspray! An owner before you must have gotten in a front collision and upon repair forgot that masking tape existed.

Looks like a great project! PP is awesome, I'd love to hear about tuning results.

 

It have been in a little collision just befor i got it, but the car is stright so i baught it..
He is not a good painter the on how was masking the car..

But those parts is going of the car and new ones going on...

 

Have done som work on the car this weekend..
Here are some pic`s..