Profec B Spec 2 Set Up Help
Thread Starter
Rotary Novice!
Joined: Apr 2005
Posts: 31
Likes: 0
From: UK,Warwickshire
Profec B Spec 2 Set Up Help
Hello all, i have just finished installing my boost controller, Greddy Profec B Spec2, and i have a few questions.
1. On the actuator there is two vac pipes, one at top and one at bottom, i have installed to the top one, is this correct?
2. I need some help with setting the thing up, What is best settings for the Start Boost, Gain, ETC.
3. The boost limiter function has settings of 0% upto 20%, how can i set this up not to exceed the 10psi figure,YES i have read the manual but i am having some trouble making sense of it all?
4. I have set the warning to 10psi
Any help would be greatly appreciated, thanks
FUNSTER.
1. On the actuator there is two vac pipes, one at top and one at bottom, i have installed to the top one, is this correct?
2. I need some help with setting the thing up, What is best settings for the Start Boost, Gain, ETC.
3. The boost limiter function has settings of 0% upto 20%, how can i set this up not to exceed the 10psi figure,YES i have read the manual but i am having some trouble making sense of it all?
4. I have set the warning to 10psi
Any help would be greatly appreciated, thanks
FUNSTER.
