3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Problem with the timing?...help

Thread Tools
 
Search this Thread
 
Old Feb 27, 2005 | 03:26 PM
  #1  
FD_RICKY's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 74
Likes: 0
From: AZUSA, CA
Problem with the timing?...help

a couple weeks ago, i took my car to a shop so that they can make it pass smog. the good news was that it finaly passed the 2nd time around but the bad news is that they "neutered" it it felt like there was a loss of power. they said that they "decarbonized the engine," and did something with the cat. i THINK that they also messed with the timing but failed to mention this to me. anyways, ive been told that it IS the timing and ive also been told that its not boosting up properly.


another thing: my exhaust turned black, which leads me to believe that im running rich. if so, what does this mean to my engine? does this pose a threat?


if u have any suggestions or comments i would GREATLY appreciate it!
Reply
Old Feb 27, 2005 | 04:48 PM
  #2  
Gadd's Avatar
Warming the planet.
Tenured Member 20 Years
 
Joined: Dec 2004
Posts: 845
Likes: 2
From: Chico, CA
You'll have to provide a bit more info. What are your mods? Do you have a aftermarket ecu? With out knowing more, try resting you ecu by disconnecting the battery and stepping on the brake pedal. They may have put the car into limp mode some how.
Reply
Old Feb 27, 2005 | 05:07 PM
  #3  
FD_RICKY's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 74
Likes: 0
From: AZUSA, CA
no mods, bone stock, except for an aftermarket exhaust that the previous owner had, its a PF.
Reply
Old Feb 27, 2005 | 05:08 PM
  #4  
FD_RICKY's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 74
Likes: 0
From: AZUSA, CA
what is limp mode?
Reply
Old Feb 27, 2005 | 08:44 PM
  #5  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
fwiw you cant change the timing. fd right (93-95)? you need to know the boost pattern before yopu can diagnose any boost probs. is the check engine light on?
Reply
Old Feb 28, 2005 | 12:35 PM
  #6  
FD_RICKY's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2005
Posts: 74
Likes: 0
From: AZUSA, CA
yeah, its a fd3s 1993 and im actually looking for a boost gauge to monitor it. my check light does come on every now and then, but then again it has alway come on every now and then.
Reply
Old Feb 28, 2005 | 01:09 PM
  #7  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
A few things to check:

Check the engine codes to see if anything is being thrown:
http://www.scuderiaciriani.com/rx7/engine_codes.html

Ask the place that did the junk to fix the emissions to let you know what they did (i.e. some "emissions passing" stuff in the gas tank, etc).
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM




All times are GMT -5. The time now is 03:12 AM.