problem !!!!
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Chicago
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
problem !!!!
ok so I did a fmic and koyo radi vert installed, and i refill coolant start the car, i had to extend the cables from fans cause of the fmic custom pipes. I drive a car for about 5 minutesa and after the fans should turn on, first car won't pass 3k and then stalls after five minutes.
and i cannnot start it with fan cables plugged in, i have to disconnect cables to get it start it again. If i don't unpluge the cables from the fans i hear some clicking when i turn my key on from.
please help
and i cannnot start it with fan cables plugged in, i have to disconnect cables to get it start it again. If i don't unpluge the cables from the fans i hear some clicking when i turn my key on from.
please help
#4
sdrawkcab
iTrader: (1)
Originally posted by Fatman0203
Limp mode. Disconnect the battery and pump the brake for 30 seconds. See if that works, take it easy at first.
Limp mode. Disconnect the battery and pump the brake for 30 seconds. See if that works, take it easy at first.
#5
Eats, Sleeps, Dreams Rotary
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rotarypower101
If you are trying to get him to reset the stock ecu, I think you have to disconnect the negative terminal and hold the brake pedal down for 30 seconds
If you are trying to get him to reset the stock ecu, I think you have to disconnect the negative terminal and hold the brake pedal down for 30 seconds
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM