pre spool controller
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: south jersey
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
pre spool controller
just installed the home depot boost controller. got the boost controller set at 12. the pre spool controller is barely open and is at 8 right now. i know how sensitive this controller is. what would happen if i closed this valve? for those guys w/ this how far open is your valve? thanks, nick
#3
Full Member
Thread Starter
Join Date: Jan 2002
Location: south jersey
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
thanks tom, if you get a chance check it out and let me know. i was under the impression the more you close it the faster it spools up and the higher boost you will get. nick
#4
gross polluter
iTrader: (2)
I just checked, mine is out 1 & 1/4 turns. After reading Rob Robinette's how-to again I still think I was correct in the more you open it the more spike at transition and higher boost out of the secondary you will get. I started with mine almost completely closed and set the boost controller where I wanted it. As I opened the pre-spool adjustment the secondary came on with more and more pressure, but as the secondary went up the primary went down. Eventually you have to adjust the boost controller to raise the boost again.
Thread
Thread Starter
Forum
Replies
Last Post
alexdimen
3rd Generation Specific (1993-2002)
20
10-23-15 01:50 PM