Power Window Fuse Keep Blowing!!!!
08-28-06, 11:32 PM
#4
Rx-hippie
iTrader: (1)
Join Date: Sep 2003
Location: Torrance CA
Posts: 2,076
Likes: 0
Received 0 Likes
on
0 Posts
Maybe the motor is dead.. soem of the windings shorted.. so when you try to roll up or down the window.. to much high current and fuse breaks.. thats most likely the problem. Pull the motor and measure the inductance to make sure its up to spec.. then test it with a power meter to see how much current it is drawing.
Or you can just swap it with a known working motor if you don't have the measuring equipment.
Or you can just swap it with a known working motor if you don't have the measuring equipment.