Polished FPR plate *pics*
#1
Glug Glug Glug Burp
Thread Starter
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Polished FPR plate *pics*
Well, I had some interest in the plate I made to mount my FPR to the UIM, so I made a new one. A nice one. Made out of 1/8" lightweight aluminum and polished. It's mounted using 2 10MM nuts on the front of the LIM, where the vacuum chamber and Wastegate and precontrol solenoids went. The FPR is mounted to the plate using the supplied plate that comes with the FPR I have. (Fuel system courtesy of rxrotary2_7 incase you are wondering or don't already know.) Comments welcome.
This is the rear showing the mounting tabs. 2 1/4" washers are between the plate and the UIM tabs.
And a pic of my template.
This is the rear showing the mounting tabs. 2 1/4" washers are between the plate and the UIM tabs.
And a pic of my template.
Trending Topics
#13
Glug Glug Glug Burp
Thread Starter
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by crazysuprakid
So Pretty. I wonder if you could have the blue and red polished out though...
So Pretty. I wonder if you could have the blue and red polished out though...
Most likely I could polish it all... But That would take FOREVER!!!
#14
Senior Member
Join Date: Mar 2002
Location: in the garage
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
can you send me a template of that plate? or maybe some type of diagram... that looks great!!! I want to do that with mine.
Mattkitson@comcast.net
thanks matt
Mattkitson@comcast.net
thanks matt
#15
Glug Glug Glug Burp
Thread Starter
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 93blackrx
can you send me a template of that plate? or maybe some type of diagram... that looks great!!! I want to do that with mine.
Mattkitson@comcast.net
thanks matt
can you send me a template of that plate? or maybe some type of diagram... that looks great!!! I want to do that with mine.
Mattkitson@comcast.net
thanks matt