please help need to remove fd turbos should this be easy
 

do I need to pick the engine

some pleas help me remove stock turbos
 

does the engine have to be pulled to get turbos off

No it doesnt, but its a huge pain in the ass to do without pulling the motor. Though I have done it before.

I've pulled motors so many times it would be faster (takes me 1.5 hours) for me to pull the motor and remove the turbos.

Follow the steps in the Manual. No, you do not have to pull the engine.

tom

No need to pull the motor 2 hour job though. Pull the DP, air pump, y pipe, ic, basically everything on that side of the motor. The turbo's are the easy part its the prep that costs the time. (mark everything) Its like 6 bolts, coolant lines and oil lines. What ever you USE lots of penatration oil. PB blaster if i recall is the stuff to use. Do a search on my handle to see a few pics on the suject

If you need help let me know. I take the drive up there and pull them off for you. It will take me about 1 hour tops if the bolts are not a PITA. I have done this many times.

Oh yeah why dod you need to remove them?

Ric

search for "pull turbos".

You don't need to pull the engine.

Did you lose your other thread asking the same question?

well if you have time to help that is much appriciated
 

I need to have them rebuilt any ideas or trips to san luis obiispo

look you my friend you are no real help

He has a point. Only make one thread. If you end up accidentally making 2, make it clear which one you want to use, and the other will disappear or get deleted.

Dave

After you've done most of the steps above, here's the location of the bolts to remove the turbos:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/stock-twin-turbo-nuts-bolts-locations-485829/

A simple "yes" would have sufficed. :rlaugh: