Pics from my rebuild
#102
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Ah yes...I can picture it now...you're grinning from ear to ear.
It's like when I saw my son born, can't stop thinking, "whoo hoo...I did that!"
It's like when I saw my son born, can't stop thinking, "whoo hoo...I did that!"
#104
Hey 93BlackFD, call that **** of Rob at "Pineapple up your *** Racing" and put your car on the phone.
Let him tell Rob a few.
I'm happy for you.
I know that feeling well too, when you can validate what you have been saying.
Where are the haters now????
Let him tell Rob a few.
I'm happy for you.
I know that feeling well too, when you can validate what you have been saying.
Where are the haters now????
#105
built my own engine
Thread Starter
screw the haters, half of their cars don't work, most of them are under age and can't afford these cars, or are overaged and afford these cars to justify their existance
i could care less what some jackasses on the internet think of me, nobody that knows me in person gives me ****- i guess it comes with the territory
my main focus now is fixing my fuel settings and getting her on the road pics/vids if i can borrow a decent camera
i could care less what some jackasses on the internet think of me, nobody that knows me in person gives me ****- i guess it comes with the territory
my main focus now is fixing my fuel settings and getting her on the road pics/vids if i can borrow a decent camera
#106
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Who is going to tune your Haltech? And which did you get? ( If there is another thred about it lead me to it please) I am thinking of going with the Haltech and getting rid of the glorified Safc,.....I mean Power FC. I don't like it at all. ( And i am single turbo, but alot/most out here are still twins.) Does it go BRAP....BRAP.....BRAP!!!!( your engine)
Last edited by BigIslandSevens; 02-02-04 at 12:25 PM.
#107
How do you run an engine off of the car? Do you hook up the full intake/exhaust/fuel/spark system?
But bravo 93blackfd... kudos to anyone who DIYs.
I couldnt find anywhere in this thread or the ones linked from, as to where you bought your rebuild kit? Do you have a good link?
But bravo 93blackfd... kudos to anyone who DIYs.
I couldnt find anywhere in this thread or the ones linked from, as to where you bought your rebuild kit? Do you have a good link?
#108
built my own engine
Thread Starter
uhh, motor is in the car...
i tuned the haltech enough to get it running, steve kan is supplying me maps to accompany the port job
yes, it goes BRAP BRAP BRAP BRAP
i made my rebuild it from ray crowe, rotary aviation, and atkins
i tuned the haltech enough to get it running, steve kan is supplying me maps to accompany the port job
yes, it goes BRAP BRAP BRAP BRAP
i made my rebuild it from ray crowe, rotary aviation, and atkins
#109
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Awsome the customer service that you seem to be getting from Gotham is friggin awsome. I have made up my mind that they are where i will have my porting done and maybe another engine all together from thee one I'm building. Kudos for stepping up to the plate Gothom boys!!
#110
built my own engine
Thread Starter
yeah, i called steve while he was at the superbowl (i think, maybe just a big party, it was loud)
he helped me get some basic settings in enough to start the car...totally out of his way
try getting rob golden on his cell phone....or try getting him to help you tune anything besides a carb
he helped me get some basic settings in enough to start the car...totally out of his way
try getting rob golden on his cell phone....or try getting him to help you tune anything besides a carb
#111
built my own engine
Thread Starter
i couldn't crank it this morning, was just flooding....
called steve, had a map within an hour...deflooded car, cleaned plugs off with some air, loaded map
cranked right up
just some fine tuning to do now, gotta put the front bumper back on and the slave cylinder in and she's on the road
called steve, had a map within an hour...deflooded car, cleaned plugs off with some air, loaded map
cranked right up
just some fine tuning to do now, gotta put the front bumper back on and the slave cylinder in and she's on the road
#113
built my own engine
Thread Starter
damn, me too...then i wouldn't have to stand outside to listen to it..i could just put it on loop and sit at my computer
sitting in the car with the steering wheel shaking and the rear view mirror vibrating while it goes brap brap brap brap is nice....
sitting in the car with the steering wheel shaking and the rear view mirror vibrating while it goes brap brap brap brap is nice....
#115
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 93BlackFD
i couldn't crank it this morning, was just flooding....
called steve, had a map within an hour...deflooded car, cleaned plugs off with some air, loaded map
cranked right up
just some fine tuning to do now, gotta put the front bumper back on and the slave cylinder in and she's on the road
i couldn't crank it this morning, was just flooding....
called steve, had a map within an hour...deflooded car, cleaned plugs off with some air, loaded map
cranked right up
just some fine tuning to do now, gotta put the front bumper back on and the slave cylinder in and she's on the road
#116
built my own engine
Thread Starter
Originally posted by Sesshoumaru
hehe yeah it's nice at first.........
after about 20,000 miles it gets old though
that's why i'm try'n to keep my FD quiet. Had enough of that.
hehe yeah it's nice at first.........
after about 20,000 miles it gets old though
that's why i'm try'n to keep my FD quiet. Had enough of that.
i have the greddy SP, it's one of the quietest...
#118
built my own engine
Thread Starter
#121
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Going from the AST to the overflow tank........ Are you going to wrap up the wiring in heat wrap or other material? And did I miss it but did you powder the pulleys yourself as well?
#124
20B FD|20B Cosmo|S5 TII
iTrader: (1)
i was trying to figure that out too rich. nothing to ste....
btw brian, well done with everything. i'm kinda looking forward to having my motor go out again. its from pineapple (i cant believe i gave them money) but its running strong as hell. that bridge is what i want to do next too.
i just read another thread on the rotary aviation apex seals which are supposedy 700% more flexible and 85% stronger (they say they're unbreakable, but nothing is unbreakable, even bruce willis had water). you have the corner seals too. that would be a beast of a motor.
hrmmm......maybe i should just buy a core and work on it while i'm waiting for my pineapple to grenade....
brap, brap, brap...where's the clip??
btw brian, well done with everything. i'm kinda looking forward to having my motor go out again. its from pineapple (i cant believe i gave them money) but its running strong as hell. that bridge is what i want to do next too.
i just read another thread on the rotary aviation apex seals which are supposedy 700% more flexible and 85% stronger (they say they're unbreakable, but nothing is unbreakable, even bruce willis had water). you have the corner seals too. that would be a beast of a motor.
hrmmm......maybe i should just buy a core and work on it while i'm waiting for my pineapple to grenade....
brap, brap, brap...where's the clip??
Last edited by paximus; 02-03-04 at 02:49 AM.
#125
built my own engine
Thread Starter
stay tuned for clip, making arrangements for a video camera
the writing in the dust is "Nothing to Steal, HA!"
something like 13 cars got broken into here in one night...i had my cwest lights out, tranny out, engine out, radio out, pretty much gutted the car....and stock rims put on
someone wiped off the dust to look into my hatch but i guess they didn't see anything they wanted
i am going to zip tie the harness out of the way of moving parts until i get the water and propane injection all hooked up like i want and then I will come back and wrap it
the motor should be pretty stout
the writing in the dust is "Nothing to Steal, HA!"
something like 13 cars got broken into here in one night...i had my cwest lights out, tranny out, engine out, radio out, pretty much gutted the car....and stock rims put on
someone wiped off the dust to look into my hatch but i guess they didn't see anything they wanted
i am going to zip tie the harness out of the way of moving parts until i get the water and propane injection all hooked up like i want and then I will come back and wrap it
the motor should be pretty stout