pfs ic fitment issues
09-27-08, 11:17 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Omaha, NE
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
pfs ic fitment issues
I finally got my pfs ic installed today and i had some serious problems getting it to fit properly. I had to push the ic a fair ways to the left (while facing it) just to i could get the tb elbow into place and the duct and ic don't line up hardly at all. I was wondering if anyone else had problems like this or it's a common occurrence. I'll post pictures of it tomorrow to clarify
09-28-08, 04:00 PM
#5
94 Single Turbo FD
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
it looks like u just have your piping aligned wrong, try undoing the top hose clamp where the y pipe meets the crossover pipe and rotate the pipe clockwise, adjust the other couplers accordingly. are u sure u have the duct in there all the way?
just mess with it a bit and it should come together for u
just mess with it a bit and it should come together for u
Last edited by Smitter; 09-28-08 at 04:12 PM.
09-29-08, 03:20 AM
#7
Need a tune
Join Date: Aug 2006
Location: Paris (France)
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't look good indeed.
I also have a efini y-pipe but had really no fitment issue. My elbow is an HKS though but I believe it has the same route as the stock one...
Try with longer couplers, ones with a hump.
I also have a efini y-pipe but had really no fitment issue. My elbow is an HKS though but I believe it has the same route as the stock one...
Try with longer couplers, ones with a hump.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM