3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Park Lights go on after ignition is turned off

Thread Tools
 
Search this Thread
 
Old Dec 31, 2001 | 01:23 PM
  #1  
GtRx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 36
Likes: 0
From: New York
Unhappy Park Lights go on after ignition is turned off

Hi all, I'm new to the forum, and the rotary world, so please bear with me. I have a '93 FD3S. When i have the park lights on. i notice the Rear defogger light is on very dim. Of course when i turn it on, the light is bright, indicating it's working. Now when i turn off the park lights, &
turn off the car (take the key out of the ignition), the park lights go on by themselves. THe switch is off, and the lights are still on. One person suggested it's the alarm, but i never had this problem, at first with the alarm, so i don't think it's the alarm. It's really annoying, cuz my battery keeps dying.
One last thing i noticed is that if i have the car on, and turn off the park lights (car still on) the park lights sometimes stay on. If i press the rear defogger on and off, the lights will shut off and on too. And as soon as the key comes out, the lights go on. Only solution was to take out the TNS relay from the relay box located near the intercooler, when i park the car. Then put it back in to drive the car.
Any suggestions would be greatly appreciated

Last edited by GtRx7; Dec 31, 2001 at 02:04 PM.
Reply
Old Dec 31, 2001 | 01:52 PM
  #2  
GsrSol's Avatar
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Suggestion #1, edit your post to say FD3S, not FD3 before JoeD see this.

#2 Try pulling a fuse for the alarm and see if that works. Never heard of this problem before but I would think it has to do with the alarm too.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PhillyFC
General Rotary Tech Support
9
Aug 21, 2015 06:36 PM
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM




All times are GMT -5. The time now is 05:11 AM.