Dvst8

iTrader: (6)

Question for the body guys,

I recently picked up the oem 99 spec bumper from corksport. Its already factory primered. Wondering if I should add another layer of primer then basecoat or just basecoat it. Any suggestions would be appreciated.

Thanks

mono4lamar

iTrader: (32)

Depending on fit, if you need to reshape it, then you'll need to re-primer it. If the fit is spot on, then you'll need to do the proper "rough" wet-sand to promote a proper adhesion to the paint. If you're not a cheap person (I sometimes am) you can use a higher quality base primer as assurance that the job is done right. Nobody likes to paint more than once...

Dvst8

iTrader: (6)

Fitment is great. Ill just 600 grit sand it and base coat. Thanks!