Over Boost problem
Thread Starter
Full Member
Joined: Mar 2001
Posts: 99
Likes: 0
From: DFW, TX
Over Boost problem
Just recently my 93 has started to make way too much boost.
If I stay in the gas while the turbos are under load, the boost will
swing all the away around to 20PSI if I let it (once was enough!).
I have the following mods:
Intake
DP
Greddy PE
MD Racing ECU.
I do not have a boost controller and have no other engine mods.
I've had the ECU for approx 3 years and it has always made perfect
12.5 MAX Boost.
Any ideas? Your help is greatly appreciated. I'm tired of having to
baby it for fear of blowing the engine....!
THANKS!
GEB
If I stay in the gas while the turbos are under load, the boost will
swing all the away around to 20PSI if I let it (once was enough!).
I have the following mods:
Intake
DP
Greddy PE
MD Racing ECU.
I do not have a boost controller and have no other engine mods.
I've had the ECU for approx 3 years and it has always made perfect
12.5 MAX Boost.
Any ideas? Your help is greatly appreciated. I'm tired of having to
baby it for fear of blowing the engine....!
THANKS!
GEB
It's never fast enough...
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
20psi 
I hope you only let that happen once.
If you made NO mods and it suddenly started boosting that high, the FIRST thing I would check would be the wastegate. You need to buy a pressure pump and test it.
I hope you only let that happen once.
If you made NO mods and it suddenly started boosting that high, the FIRST thing I would check would be the wastegate. You need to buy a pressure pump and test it.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM