I am going Haltec in the near future on my automatic 93 rx7 and want to completely remove the OMP, block it off, remove the oil metering lines and plug them. But I want to do this now with the stock ECU and run pre-mix. What I need to know is :

What wires from the ECU need resistors that go to the OMP ? Wire color codes would be very nice.
Is there anything on the OMP that, after removal, would prevent a block off plate going on ?
What to do with the OM injector holes after removing the lines? What size bolt or plug to install?

I want to do a clean surgery on all the wires and lines as best I can. Anyone who has done this exact same thing, please let me know what you did.

Thanks, Tom

 

Nobdy done this ?

Tom