Ok guys tell me the truth>>>>
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: Carson City,NV
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys tell me the truth>>>>
Last Saturday I went drag racing the first time since I got the car done,now I my best time was 12.6 @ 113 mph @ 6000 ft elevation and running only 1 bar of boost I could of up the boost but I'm still trying to baby my damn car,and my 60ft was pretty bad(2.3)I was running Nitto drag radials and still slipping all first gear.What do you think ??
#4
HARRRRRRRRR
Join Date: Jan 2002
Location: Marietta GA
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
Try launching a little lower to keep from the massive wheel spin. That ought to help a lot. Remember 'more traction = better times'
I don't doubt you could get it down to about 12.3 or 12.4. Just keep practicing
I don't doubt you could get it down to about 12.3 or 12.4. Just keep practicing
#6
Senior Member
Join Date: Mar 2001
Location: Salem MA
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ttpowerd
Try launching a little lower to keep from the massive wheel spin. That ought to help a lot. Remember 'more traction = better times'
Try launching a little lower to keep from the massive wheel spin. That ought to help a lot. Remember 'more traction = better times'
DITTO!
Trending Topics
#8
Tony Stewart Killer.
iTrader: (12)
umm 12.6 is a really good time that means you have a very fast car compared to most on the road
however with the mods you have I'd think you could do much better than that. I don't know how much the elevation hurts your time but it should be considerably higher I think.
Why did you get all those mods? Raise the damn boost!!
How many miles on your car?
I understand if you are trying to baby it if you just got the motor put in but you shouldn't be at the track at all if that is the case. I would say give it a good 1000 miles after to break in and then use it 100%.
I have intake, downpipe, and catback, pettit ecu and a rebuilt mild street ported motor and thats about all that I have that adds hp and I'll be running 12 pounds of boost. The owner of the shop told me with this setup I will run 12.7 on a very good run. So I'm guessing from this that yours should be much better. He also told me if I add fuel pump, midpipe, and turn the boost up to 13 I will run a 12.4.
good luck with that and be nice to your car for a while I know I'm going to....
SNook
however with the mods you have I'd think you could do much better than that. I don't know how much the elevation hurts your time but it should be considerably higher I think.
Why did you get all those mods? Raise the damn boost!!
How many miles on your car?
I understand if you are trying to baby it if you just got the motor put in but you shouldn't be at the track at all if that is the case. I would say give it a good 1000 miles after to break in and then use it 100%.
I have intake, downpipe, and catback, pettit ecu and a rebuilt mild street ported motor and thats about all that I have that adds hp and I'll be running 12 pounds of boost. The owner of the shop told me with this setup I will run 12.7 on a very good run. So I'm guessing from this that yours should be much better. He also told me if I add fuel pump, midpipe, and turn the boost up to 13 I will run a 12.4.
good luck with that and be nice to your car for a while I know I'm going to....
SNook
#11
I have an idea for you. Spend the cash on some ET streets, launch it at 5500 and run mid to high 11's at 6000 ft. elevation. That would be most impressive.
Oh... yeah, crank up the boost and really give it hell!
Andrew
Oh... yeah, crank up the boost and really give it hell!
Andrew
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM