HDP

iTrader: (2)

I can't seem to locate the wire for the oil sender unit. Can someone please tell me which harness it originates from and describe where it would be located on the harness?

HDP

iTrader: (2)

Anyone?

edwin-82/rx7

iTrader: (1)

I can help in a couple days, I just pulled that part of the harness, it also takes care of the starter and runs back up to the fuseblock. Just have to get over to take a look at it, mine is broken off as well...

J

rx7will

iTrader: (6)

If you are talking about the oil pressure sending unit, its part of the engine harness. But after the firewall, it is pluged into another harnees that goes to the gauge cluster. Just pull back the carpet by ecu and you should se a bunch of connectors.

HDP

iTrader: (2)

Thanks Guys. David Garfinkle called me last night about 7:30 and explained in detail where it's located and where to trace it back to the gauge cluster. This harness I have is a replacement I got from a friend, so I guess the wire was "missing" when I received it.

HDP

iTrader: (2)

Found the wire! The connector was missing and I guess when I was re-wrapping the harness, I taped over the wire. All is good, I just need to find a similar connector and crimp it on.