Oil Leaking - Pan or Rear Seal? Need Help
I have a slow leak near the rear of the engine. It kind of looks like it's coming from the rear seal or the rear side of the oil pan. I can't really tell. I've already cleaned it up and monitored the leak.. and it's damn hard to pinpoint where it's leaking from.
A question for you guys... how common is it for the rear seal on this engine to leak oil? it was pretty common on honda's but i'm not sure about the Rotories.
Also, if i drop the sub-frame to change the oil pan gasket, will that throw my alignment off?
A question for you guys... how common is it for the rear seal on this engine to leak oil? it was pretty common on honda's but i'm not sure about the Rotories.
Also, if i drop the sub-frame to change the oil pan gasket, will that throw my alignment off?
Welcome to the forum. I highly recommend watching this instructional training film on forum etiquette 
http://projectboil.pixel10.co.uk/posting/Posting.html
J/K
More than likely it's the rear main oil seal and can you check that by looking for black goo on the inside of the bellhousing by looking though the transmission viewport. In my case I was leaking from the rear main oil seal, the oil pan, and the rear stationary gear O ring.

http://projectboil.pixel10.co.uk/posting/Posting.html
J/K
More than likely it's the rear main oil seal and can you check that by looking for black goo on the inside of the bellhousing by looking though the transmission viewport. In my case I was leaking from the rear main oil seal, the oil pan, and the rear stationary gear O ring.
Last edited by mgoddard1; Aug 26, 2004 at 09:16 PM.
Originally Posted by mgoddard1
Welcome to the forum. I highly recommend watching this instructional training film on forum etiquette 
http://projectboil.pixel10.co.uk/posting/Posting.html
J/K
More than likely it's the rear main oil seal and can you check that by looking for black goo on the inside of the bellhousing by looking though the transmission viewport. In my case I was leaking from the rear main oil seal, the oil pan, and the rear stationary gear O ring.

http://projectboil.pixel10.co.uk/posting/Posting.html
J/K
More than likely it's the rear main oil seal and can you check that by looking for black goo on the inside of the bellhousing by looking though the transmission viewport. In my case I was leaking from the rear main oil seal, the oil pan, and the rear stationary gear O ring.
Thanks dude.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM



