3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

oil leak around turbo

Thread Tools
 
Search this Thread
 
Old Mar 30, 2004 | 02:49 PM
  #1  
Roar 629's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2003
Posts: 517
Likes: 0
From: San Francisco, CA
oil leak around turbo

the story gos like this, i was cleaning my engine bay like usual, and found a small "trace" of oil around the connection of the y-pipe and cross pipe, and some oil around the coupler from cross pipe to ic. is the turbo about to give up? i'm about to open them up this weekend. thanks
Reply
Old Mar 30, 2004 | 02:54 PM
  #2  
rdavidsrx7's Avatar
block-spike
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 548
Likes: 0
From: West Chester, PA
Some oil in the intake tract is common the question is how much your seeing. Any smoke from exhaust under boost? That is a better sign of seals in the turbo going. Also....do you mean there is oil leaking outside the intake???? If so I would tighten up those connectors. Oh yeah and wait till ya check the bottom of the IC, there will probably be a small pool of oil there.
Reply
Old Mar 30, 2004 | 04:16 PM
  #3  
Roar 629's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2003
Posts: 517
Likes: 0
From: San Francisco, CA
there's mist of oil stick inside around the intercooler .. i have see a pool of oil in a intercooler before( was helpin my fren out, found out his turbo shot)
Reply
Old Apr 9, 2004 | 05:16 PM
  #4  
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2002
Posts: 140
Likes: 0
From: Florida
Im not sure if my problem is the same way but I just got my Rx7 and when the car is running it drips a very tiny amount of oil but it looks like its dripping from the general area of the turbos. But there is no smoke on acceleration or deceleration and i mean I dont know if it would mean anything but I stuck my finger in the abv hose that runs the blow off air into the air box and I didnt feel any oil so idk. Where else should I check see what the problem is?
Reply
Old Apr 9, 2004 | 06:58 PM
  #5  
areXseven's Avatar
il Cosa Nostra e vivo!!
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 2,096
Likes: 1
From: Dove le cose sono fatte il vecchio moda il senso
Originally posted by adidashatesnike
......it looks like its dripping from the general area of the turbos.
Look around the oil inlet lines that screw into the Bearing Housing from the top (one on each side). And also check for leaks coming from underneath the Turbos at the oil outlet lines and also where those lines attach onto the block. Six (6) different possibilities.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Cameron38
1st Generation Specific (1979-1985)
3
Aug 19, 2015 06:08 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 06:46 AM.