When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone have a scan/CAD file for a map pocket lid? If not I'm about to start working on one as a side project from the 3d printable door plastics and figure out a pin design that would work
Two parts I would like to be able to print are the transmission oil pan and differential cover.
Upgraded ones with extra capacity and cooling fins are just a bit too expensive for what they are.
Seems like they would be good parts to print with metal laser sintering.
Does anyone know of a company or someone that can do individual and or low-quantity ABS injection molding? I have a very solid CAD file for the driver-side door plastics and am curious about the different routes I could take to get them made. I've 3d printed the halves already, Just don't have a good way yet of aligning the 2 halves yet.
Photos of progress and those curious
Wow, I love it. Have you attached it? If yes, can you please share a picture of it? I like the color combination. Thank you in advance.
I know it would take a massive effort but has anyone ever thought of scanning most of the car and somehow making it a full 3D explodable model. It would be super dope to be able to “work” on the car in virtual reality and then apply it in the real world. Would even be able to include like a repository of all the mods and custom panels people have made models of and see how they would look and fit.
These covers that sit on top of the FD headlight retractor motor are hard to find. They are rubber, but perhaps a plastic substitute could be designed.
These covers that sit on top of the FD headlight retractor motor are hard to find. They are rubber, but perhaps a plastic substitute could be designed.
I'll see if I have any. Should be easy to replicate.
These covers that sit on top of the FD headlight retractor motor are hard to find. They are rubber, but perhaps a plastic substitute could be designed.
Does anyone have a scan/CAD file for a map pocket lid? If not I'm about to start working on one as a side project from the 3d printable door plastics and figure out a pin design that would work
These covers that sit on top of the FD headlight retractor motor are hard to find. They are rubber, but perhaps a plastic substitute could be designed.
Does anyone have photos of this small bracket or one that they can take pictures of? It's on the driver-side door plastic, and the only one that I have is absolutely destroyed and I can't find anything online that could help me model one
Does anyone know of a company or someone that can do individual and or low-quantity ABS injection molding? I have a very solid CAD file for the driver-side door plastics and am curious about the different routes I could take to get them made. I've 3d printed the halves already, Just don't have a good way yet of aligning the 2 halves yet.
Photos of progress and those curious
Probably easier just to send to a print farm with bigger printers instead of injection molding at low volume.
Not necessarily an oem piece but printed out a few of these tpu fuel line retainers for the oem metal brackets to fit -8an and -6an feed and return lines.
Printed out these tpu bushings that snap into the factory fuel line clamps and holds a -8 feed and -6 return. Only works if you ditch the factory hardlines including the fuel tank vent line.
Does anyone know of a company or someone that can do individual and or low-quantity ABS injection molding? I have a very solid CAD file for the driver-side door plastics and am curious about the different routes I could take to get them made. I've 3d printed the halves already, Just don't have a good way yet of aligning the 2 halves yet.
Photos of progress and those curious
There's a guy on facebook that already does. A.i. One Designs. https://www.facebook.com/A.I.One.Designs/
And there is a guy that is on here and facebook that does 3d printed parts. Drake (www.draklore.com) https://www.facebook.com/draklores/
Fwiw, I have a heated/enclosed printer and a creality Scanner. I also have no interior plastics aside from the dash and seats (no gauge bezel or hood)
if anyone is local to me (the colony, tx), I have a creality scanner I could help with scanning in parts.
i can also model, just not that great at it yet.
heres an attempt at creating an injector holder to diy flush the stock injectors out.
/ creating the mesh stl.
If anyone has a model for the top of the door panel vents (LHD) and a good color match to the red interior, I'd be willing to buy a set. Found a company a few years ago, Protoforge, that had almost an exact red color match and very good print quality, but seems they aren't making FD parts anymore.
