OEM Part Heaven in 2007: Ray Crowe has gone CRAZY with his prices!
#52
Full Member
Join Date: May 2003
Location: PA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
Mine fit well after.....after 3 years no scraping on the pass side and minimal scraping on the driver's side. I think a lot has to do with how tightly you get them mounted, and how loose your door is on the hinge.
#53
No it's not Turbo'd
I never understood why MAZDA OEM Scuff Plates can't use the OEM clips that come with the original plates.... Having you drill seems like an engineering cop-out...
Especially after the first 1-2 years of the initial run...
Especially after the first 1-2 years of the initial run...
#54
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by DCrosby
I never understood why MAZDA OEM Scuff Plates can't use the OEM clips that come with the original plates.... Having you drill seems like an engineering cop-out...
Especially after the first 1-2 years of the initial run...
Especially after the first 1-2 years of the initial run...
#57
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Nova7
What does the engine overhaul kit normally go for? I take it this is all Mazda parts?
#62
Full Member
Join Date: Jul 2006
Location: Los Angeles
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Some bastards tried to steal my seven last night! Drilled through my trunk lock, popped the hatch, drilled through my entire ignition and had my car in the on position with a flat head!
The only things that saved my car: Autolock and fuel cut switch......AHHHH!!!
/ Vent
One phone call to Ray at Malloy, and I purchased the entire ignition assembly with new keys for a great deal! Ray rocks my socks, almost 100 dollars lower than the local dealer prices, and that's WITH overnight shipping!!!!
The only things that saved my car: Autolock and fuel cut switch......AHHHH!!!
/ Vent
One phone call to Ray at Malloy, and I purchased the entire ignition assembly with new keys for a great deal! Ray rocks my socks, almost 100 dollars lower than the local dealer prices, and that's WITH overnight shipping!!!!
#63
Senior Member
iTrader: (5)
Join Date: Aug 2003
Location: Kitchener, ON
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Awesome! I have a 94 that I just bought for a project. It was stolen too and needs a new ignition switch and combination switch. I'll definitely contact Ray when I have the funds!
#67
Cold Play
iTrader: (1)
Join Date: May 2005
Location: Northern Cali - Sonora
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by herblenny
I called about the AC panel.. I think he said 160 or 190.. either case, its bit much for me..
#68
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by travs92vr4
Is that with the controls? And can you get it in the 94 bumpy?
#69
Cold Play
iTrader: (1)
Join Date: May 2005
Location: Northern Cali - Sonora
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
That's w/out the controls. The only way to get the 94 finish (unfortunately) is with all of the controls, and somebody posted earlier in this thread that it was $650! ouch. I'm very glad I already converted to a full 94 interior.....
#74
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by lotta-boost
what about the shifter boot and ring?(I need both) can I get a deal on that?