OEM Harness & Aftermarket Seats?? Help Pease!
#1
Full Member
Thread Starter
Join Date: Dec 2003
Location: Portland, OR
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
OEM Harness & Aftermarket Seats?? Help Pease!
I have a 93 FD and just purchased a pair of Bride Brix II seats and Bride seat rails to match for a fair price. My intent is to mount the seats with the OEM seatbelt for street use, but stupidly I didn't think about how I was going to do that with the OEM harness being mounted on my stock seat rails untill just this moment. I don't really want to scrap the new rails if I don't have to.
Can I use the oem harness end on the stock seat on the aftermarket seats or will i need to fabricate something? I really don't know how to tackle this.
The next step I plan on taking is adding a roll bar and mounting points for a 5-6 point harness, in case that might change my options for setting up the factory harnesses.
Any suggestions would be a big help.
Thanks, Doug.
Can I use the oem harness end on the stock seat on the aftermarket seats or will i need to fabricate something? I really don't know how to tackle this.
The next step I plan on taking is adding a roll bar and mounting points for a 5-6 point harness, in case that might change my options for setting up the factory harnesses.
Any suggestions would be a big help.
Thanks, Doug.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM