o2 / IAT sensors : possible miswiring ??
#1
Eric Seven
Thread Starter
o2 / IAT sensors : possible miswiring ??
Hey,
After changing the Downpipe on my 93 stock FD, I checked the ECU and got a 11 error code for the first time. (11=IAT sensor).
I was pretty astonished because I didn't touch the IAT's cables, and then I noticed I forgot to plug back in the DP o2 sensor. (shame on me)
I plugged the o2 sensor cable back in, and checked the ECU : the 11 error code disapeared...
I'm pretty puzzled now, can it be some sort of miswiring in the harness ?
the plug connectors are not compatible from what I see ( o2 :1 pin / IAT : 2 pin )... so what else ?
Just a coincidence ? anyway, in the meantime I've bought a new IAT sensor, so I'll change it tomorrow
After changing the Downpipe on my 93 stock FD, I checked the ECU and got a 11 error code for the first time. (11=IAT sensor).
I was pretty astonished because I didn't touch the IAT's cables, and then I noticed I forgot to plug back in the DP o2 sensor. (shame on me)
I plugged the o2 sensor cable back in, and checked the ECU : the 11 error code disapeared...
I'm pretty puzzled now, can it be some sort of miswiring in the harness ?
the plug connectors are not compatible from what I see ( o2 :1 pin / IAT : 2 pin )... so what else ?
Just a coincidence ? anyway, in the meantime I've bought a new IAT sensor, so I'll change it tomorrow
#2
RX-7 Bad Ass
iTrader: (55)
That is weird. Yeah, you are correct - O2 is one wire, IAT is 2.
Could be possible the blinking light code looked like IAT but was the code for the O2 or something?
Dale
Could be possible the blinking light code looked like IAT but was the code for the O2 or something?
Dale
The following users liked this post:
tomatoto (11-05-18)
#3
Eric Seven
Thread Starter
I double checked it, so I'm sure about this code. That's so weird.
Since I bought one, I changed the IAT sensor today, at least I'm sure it's OK now. I'll see if the code comes back later....
but before putting back the UIM, I need to solve another problem >> https://www.rx7club.com/3rd-generati.../#post12311711
Thanks Dale !
Since I bought one, I changed the IAT sensor today, at least I'm sure it's OK now. I'll see if the code comes back later....
but before putting back the UIM, I need to solve another problem >> https://www.rx7club.com/3rd-generati.../#post12311711
Thanks Dale !
Thread
Thread Starter
Forum
Replies
Last Post
Sandro
3rd Generation Specific (1993-2002)
16
03-22-10 04:04 PM
moehler
3rd Generation Specific (1993-2002)
13
07-06-09 09:30 PM