is this a normal boost pattern?
is this a normal boost pattern?
well i adjusted my BOV tonight cause i felt like i was bleeding off boost way to early...installed my boost gauge and this is what i get... 11-8or9-11...... i also had a spike of 13 really quick.. don't know why but i wasn't even all the way on it... def. a lot more power than before. but i want to be safe and run safe levels...
Your boost should never exceed 11, maybe even 12psi on all stock tuning and fuel. Spikes included. It should be 10-8-10. Are you sure you don't have more mods? (Esp. exhaust mods?)
As for being less than WOT, be careful, especially when temps cool down. You can install a MBC on the wastegate line or change out the pill to a larger orifice. Unplugging the wastegate should keep you at 7psi until you decide what to do.
Dave
As for being less than WOT, be careful, especially when temps cool down. You can install a MBC on the wastegate line or change out the pill to a larger orifice. Unplugging the wastegate should keep you at 7psi until you decide what to do.
Dave
no mods except intake and bov..... i also have hard intercoller pipes on there but that is it...
i have apexi gt exhaust, rx7store mid and down pipes, apexi pfc and commander , and koyo rad. waiting to be installed.
i have apexi gt exhaust, rx7store mid and down pipes, apexi pfc and commander , and koyo rad. waiting to be installed.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM





