non seq teq question
#1
Full Member
Thread Starter
Join Date: Nov 2003
Location: uk
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
non seq teq question
recently done a non seq conversion but what do you need to put into the airpump wire the pump has been removed and also the egr wire do they require resitors at all as it seem to idle high
any ideas
any ideas
#2
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
There have been few discutions about the resistors working and not working, hooked on the air pump wire/connector. In my case it worked fine and cured 90% of the idle jumpiness.
First thing you should do is adjust the idle than try the ressistors, I use 3pc. of 330 OHM ones, see how it works for you.
John.
First thing you should do is adjust the idle than try the ressistors, I use 3pc. of 330 OHM ones, see how it works for you.
John.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM