non consistant boost pattern?
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: Minneapolis, MN
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
non consistant boost pattern?
it seems that I get a different boost pattern depending on gear, and current driving style eg accelerating hard from 1 on, mashing throttle in 4th at highway speeds etc. is this normal? I just installed my boost gauge this weekend, so this is all new to me.
#3
Senior Member
Thread Starter
Join Date: Jan 2002
Location: Minneapolis, MN
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RICKRX7
Yes that is normal. Now that you have a boost gauge,you should do the 3rd gear acceleration test.
Yes that is normal. Now that you have a boost gauge,you should do the 3rd gear acceleration test.
yes, I am still a newbie!!!!
btw, gunna get on the dyno this week.. I am concerned about running lean....
#4
Full Member
Join Date: Mar 2001
Location: Washington D.C.
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Drive the car to 30mph in 3rd gear. Then go to WOT, you should read 10psi at around 2800-3000rpms, @ 4500rpms there should be a slight dip to 8psi with an instant jump to 10psi when the second turbo kicks in.
#6
Senior Member
Join Date: Mar 2001
Location: Richland, WA
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
I do no remember the details. you will have to do a search. You will be able to see if your FD is up to speed and you are boosting properly.
Dyno? have you added some mods? You might want to wait on the test.It requires you to WOT through 3rd gear.
Dyno? have you added some mods? You might want to wait on the test.It requires you to WOT through 3rd gear.
#7
Senior Member
Thread Starter
Join Date: Jan 2002
Location: Minneapolis, MN
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
my mods so far:
RB cat back
PFS DP
PFS SMIC
PFS cold air
PFS pigy ECU (the one with 1 2 3 settings)
efini y-pipe
alum ast
blitz boost & water temp gauges
RB cat back
PFS DP
PFS SMIC
PFS cold air
PFS pigy ECU (the one with 1 2 3 settings)
efini y-pipe
alum ast
blitz boost & water temp gauges
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
alexdimen
3rd Generation Specific (1993-2002)
20
10-23-15 01:50 PM