no start/no fuel
Thread Starter
Rotary Freak
Joined: May 2001
Posts: 1,779
Likes: 0
From: Peoria, IL
no start/no fuel
Help.
Car will not start.
Here is the situation:
Replaced LIM gasket
Removed and cleaned fuel injectors
Installed FC thermoswitch while I was in there
What I have checked or confirmed:
I have fuel to the rail. Pressure is good.
Injectors are clicking when I ground the pins at the ecu
Main EGI relay is good
Circuit opening relay is good
Car will start with starting fluid, but not without it
I am at a loss. I don't know what to check or look for from here.
Car will not start.
Here is the situation:
Replaced LIM gasket
Removed and cleaned fuel injectors
Installed FC thermoswitch while I was in there
What I have checked or confirmed:
I have fuel to the rail. Pressure is good.
Injectors are clicking when I ground the pins at the ecu
Main EGI relay is good
Circuit opening relay is good
Car will start with starting fluid, but not without it
I am at a loss. I don't know what to check or look for from here.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM