3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

No leading spark?

Thread Tools
 
Search this Thread
 
Old 11-24-05, 01:28 AM
  #1  
Senior Member

Thread Starter
iTrader: (4)
 
1985GSL's Avatar
 
Join Date: Oct 2004
Location: Hudson WI
Posts: 386
Likes: 0
Received 0 Likes on 0 Posts
No leading spark?

My friend just got a 3rd gen for $3500 but it wont start. we pulled all the plugs and the leading plugs dont spark but the trailing do. therefore the car wont start. niether of us know much about 3rd gens so what do you think the problem could be? Thanks
Charlie
Old 11-24-05, 01:59 AM
  #2  
resU deretsigeR

 
TwinTurbo_SE7EN's Avatar
 
Join Date: Dec 2004
Location: TN
Posts: 675
Likes: 0
Received 0 Likes on 0 Posts
leading coil...or leading coil harness.

Directly under the throttle body, there are three coil packs. The one in the middle runs both leading plugs. check to make sure the connector is on and there arent and broken wires or anything.
Old 11-24-05, 01:07 PM
  #3  
Senior Member

 
Veger's Avatar
 
Join Date: Aug 2005
Location: UK
Posts: 447
Likes: 0
Received 1 Like on 1 Post
id go with coilpack as well
Old 11-24-05, 05:07 PM
  #4  
What's your point ?

 
CantGoStraight's Avatar
 
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes on 0 Posts
https://www.rx7club.com/forum/showthread.php?t=485078
Old 11-24-05, 09:34 PM
  #5  
Senior Member

iTrader: (10)
 
theo481's Avatar
 
Join Date: Aug 2005
Location: Hudson WI
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
thank you for pointing out his "buddies" Thread, but in all seriousness will this probably get the car to run again, if i get spark in the leading coils??
Old 11-25-05, 02:35 AM
  #6  
resU deretsigeR

 
TwinTurbo_SE7EN's Avatar
 
Join Date: Dec 2004
Location: TN
Posts: 675
Likes: 0
Received 0 Likes on 0 Posts
it could possibly make it run again. Without leading plug spark, it will run VERY poorly and most likely not at all. Obviously if you arent getting spark on the leading plugs, you will have to replace the leading coil or its harness. so its a starting point.
Old 11-25-05, 09:57 AM
  #7  
What's your point ?

 
CantGoStraight's Avatar
 
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by theo481
thank you for pointing out his "buddies" Thread, but in all seriousness will this probably get the car to run again, if i get spark in the leading coils??

The car should and will run if you atleast have leading coil spark, I have had occasion where the trailing plug wire has come loose or been knocked off and wouldn't have know it other than a visual inspection turned it up. Are you getting your CAS signal, may want to check the ignitor under the power brake booster for damage. I've seen where people have drilled through the fire wall to run a wire or hose and damaged a wire on that, the car will run as long as the key was held in the start position, but would die as soon as it was released to the run position.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 06:47 AM
GKW
1st Generation Specific (1979-1985)
5
09-28-15 04:34 PM
subeone
General Rotary Tech Support
0
09-24-15 09:58 PM



Quick Reply: No leading spark?



All times are GMT -5. The time now is 04:29 PM.